[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

LUN field in R2T

To: <ips@xxxxxxxx>
Subject: LUN field in R2T
From: Sears_Bill@xxxxxxx
Date: Wed, 2 Jan 2008 13:27:31 -0500
Thread-index: AchNbSMPJWDKKt1wSSiZ1D9qXLiETw==
Thread-topic: LUN field in R2T

Just a quick clarification:

10.8.5. Target Transfer Tag

[...]The Target Transfer Tag and LUN are copied in the outgoing data PDUs and are only used by the target.

Does this mean that the LUN field in the R2T does not need to contain the actual LUN number specified by the SCSI write? Since the field is “only used by the target” I assume this text means that the target may place anything it wants in the LUN field of the R2T and have it echoed back by the initiator.

_______________________________________________
Ips mailing list
Ips@xxxxxxxx
https://www1.ietf.org/mailman/listinfo/ips

Follow-Ups:
- Re: LUN field in R2T
  - From: Julian Satran
- Re: LUN field in R2T
  - From: dcuddihy

Prev by Date: Re: Immediate Commands in iSCSI
Next by Date: Re: LUN field in R2T
Previous by thread: Pending R2T's at the initiator and initiator issuing "abort task"
Next by thread: Re: LUN field in R2T
Index(es):
- Date
- Thread

[IETF] [Linux iSCSI] [Linux SCSI] [Linux Resources] [Yosemite News] [IETF Announcements] [IETF Discussion] [SCSI]